Category: Hot melt adhesive can be divided into Construction adhesive, Back adhesive, Spandex elastic adhesive.
Storage: Can be stored 12 months in a clean dry clean dry place, in its original package at an average temperature of 25ºC or below. Storage temperature should not exceed 35ºC.
Clean-up: Mineral oil or paraffin wax, not to exceed flash points as stated on the MSDS, followed by a thorough purge with the adhesive itself.
Package: Available in film wrapped block( about 1kg or 2kg).
Safety: MSDS should be consulted for proper handling before use. Wear safety gloves and goggles when handling molten adhesive. TEP 960 compositionally complies with FDA 175.105.
